To get the best performance from REANNZ's network, you may need to make some tuning and configuration adjustments to your connection or your internal network.
Contact the REANNZ Network Operations Centre at email@example.com to get help on your Network optimisation
Dial up your network performance
Standard commercial networks often constrain capacity, which means that the performance of your network, hardware and devices may be dialled back to ensure a smooth experience under these restricted conditions.
In comparison, our network’s full capacity is there for you to take advantage of, giving you the opportunity to configure your network, hardware and devices to get the best performance possible.
Areas for optimisation
The possibility for significant improvements in network throughput performance can be achieved through turning your attention to the following areas:
- Host tuning
- Application settings
- Network tuning
If you are not getting the performance or throughput from our network that you expect, you may have a bottleneck.
Identifying whether you have a bottleneck, what and where it is can be challenging. The best place to start looking is at the network border and work your way back. In some cases it may be better to work from the end user out.
As a starting point, you can use our Network Diagnostic Tool (NDT). The NDT server enables you to troubleshoot and measure network performance over both IPv4 and IPv6.
We have advice and resources on the following areas to help you get the best performance from the network: